(1) Key lock securing the mechanism and electronic circuit of the device’s against access of unauthorised people, (2) mounts of the mechanism and the electronic circuit’s cover, (3) frame of the device’s roof, (4) fastening of the roof’s frame to the device’s side legs, (5) a black rubber jacket of the rotor and mechanism’s joining point, (6) frame of the device’s side leg with a patent profile allowing leading supply and control cables from the foundation to the device’s mechanism, (7) diode pictogram informing about the device mechanism’s unlocking/locking status (green arrow for the unlocked status/red cross for the locked status), (8) device’s rotor creating personal passage sections, (9) the device rotor’s wings made of round profiles stopped with black caps at its ends, (10) protection against access of people to the device’s section not being the passage section, (11) rotor’s footing to the foundation equipped with a bearing, (12) footing for mounting side legs to the foundation.
The turnstiles are designed for assisting pedestrian access control at guarded passage ways, inside buildings and on the outside (under roofing). Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control. Controlling devices (i.e. reader, button, electronic control, infrared remote control) can be attached to the gate. Devices are intended for continuous operation and they may be used in a high density of pedestrian traffic zones.
The device’s main application is to support pedestrian traffic control at airports (e.g. authorised personnel only passage ways, as well as directing
passenger traffic), at railway stations (e.g. points of ticket control/access control and passenger traffic), points of access control in public utility buildings, points of ticket control and fees (e.g. to sports facilities, show facilities, exhibition halls, theatres, cinemas), access and time attendance control points in working places (e.g. dedicated areas at factories, offices).
"...Full height turnstiles - BA series is a robust device designed primarily for outdoors such as the entrance to the workplace, factory etc"Kierownik działu projektowego
NEW CONTROL MODULE
LED screen allowing configuration through the program's MENU. Clear MENU gives possibility to change many of the device's parameters.
VISUAL INFORMATION (PICTOGRAMS)
Visual information identifies unlocking or locking status of the device arms’ movement. Green arrow informs that the device’s unlocking status is active. Red cross informs about the status of locking arms movement/rotation for the traffic defined direction.
ENTRY AND EXIT CONTROL
The device’s mechanism is equipped with a system supporting pedestrian traffic control in both traffic directions (entry/exit from the control zone). In case of pedestrian traffic “collision”, the chip remembers external signals received alternately.
Device's mechanism is equipped with electromechanic system which controls the wings movement.
The device is equipped with a clutch separating driving gear from arms. The clutch adjust the torque of arms, when it encounters an obstacle.
Download catalogue card to learn the detalis of the turnstile's construction.
|Power supply voltage||24VAC|
|Maximum power consumption||
|Maximum current consumption||5A|
|Steering signal||(max. 1 sec)|
|Operation temperature||- 25o to +50o C|
|Storage temperature||- 30o to +60o C|
|Operation environment||inside and outside of buildings|
|IP protection rate||IP 44|
|Maximum operation humidity||85%|
|Net weight||~280 kg|