(1) Key lock securing the mechanism and electronic circuit of the device’s against access of unauthorised people, (2) a black rubber jacket of the rotor and mechanism’s joining point, (3) frame of the device’s side leg with a patent profile allowing leading supply and control cables from the foundation to the device’s mechanism, (4) diode pictogram informing about the device mechanism’s unlocking/locking status (green arrow for the unlocked status/red cross for the locked status), (5) device’s rotor creating personal passage sections, (6) the device rotor’s wings made of round profiles stopped with black caps at its ends, (7) protection against access of people to the device’s section not being the passage section, (8) rotor’s footing to the foundation equipped in a bearing, (9) footing for mounting side legs to the foundation, (10) additional barrier supporting the control of the pedestrian traffic (BA3-1-TW model).
The turnstiles are designed for assisting pedestrian access control at guarded passage ways, inside buildings and on the outside (under roofing). Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control. Controlling devices (i.e. reader, button, electronic control, infrared remote control) can be attached to the gate. Devices are intended for continuous operation and they may be used in a high density of pedestrian traffic zones.
The device’s main application is to support pedestrian traffic control at airports (e.g. authorised personnel only passage ways, as well as directing
passenger traffic), at railway stations (e.g. points of ticket control/access control and passenger traffic), points of access control in public utility buildings, points of ticket control and fees (e.g. to sports facilities, show facilities, exhibition halls, theatres, cinemas), access and time attendance control points in working places (e.g. dedicated areas at factories, offices).
"...Full height turnstiles - BA series is a robust device designed primarily for outdoors such as the entrance to the workplace, factory etc"Kierownik działu projektowego
Reversible coils are used when device shall be unlocked in case of power failure (standard coils stay locked in
case of power failure).
Note: reversible coils are mounted exclusively on the production line. In case of choosing option with reversible coils the option shall be included in the order form (for details- contact with sales department).
Control panel (version depends on the number of controled devices – 8,6,4 control switches), housing made of stainless steel AISI 304 (EN 10088). Control panel is designed for manual unlocking of arms' movement for both passage directions.
POWER SUPPLY 230/24V
Single-phase safety isolating transformer designed and tested according to EN61558-2-6. The construction is produced with modern technology and satisfies ever-increasing requirements of service life and reliability. Power supply is adapted for DIN-rail mounting system (35mm DIN-rail).
Download catalogue card to learn the details of the turnstile's construction.
|Power supply voltage||24 VAC||24 VAC|
|Maximum power consumption||
|Maximum current consumption||5 A||5 A|
|max. 1 sec.||max. 1 sec.|
|Operation temperature||-25o to +50o C||-25o to +50o C|
|Storage temperature||-30o to +60o C||-30o to +60o C|
|Operation environment||outside and inside of buildings||outside and inside of buildings|
|IP protection rate||IP 44||IP 44|
|Maximum operation humidity||85%||85%|