Speed Gates A1

The high-speed gate allows quick and liquid opening and closing of the gate wings. Drives of the device, in its standard version, allow clearing a passage zone within about 5 seconds, what in testing conditions allows driving through the passage zone practically without stopping a vehicle.

The gate allows to connect a variety of devices to assist the device operation, e.g. an inductive loop, sensors of vehicles, intersecting sensors, light signalling, WIFI control devices, infrared control devices (e.g. a remote control).

The structure of folding wings allows using the gate at a site, where other types of gates (e.g. sliding or swinging) cannot be installed due to a lack of space. A mechanisms of the drive was designed at the top of the gate in order to prevent snow or other impurities (e.g. road salt) from deposition.

The high-speed gate was designed to be used outside buildings, in particular for public utility facilities, factories, hotel car parks, military units, airports, sports facilities, etc.

Controlling the gate and its configuration is possible via a touch screen with a user friendly menu in a form of computer icons.

The gate is equipped in a mechanical lock, which can be unlocked if there is power shortage. Software of the drives control allows a synchronous operation of wings, diagnostics of connections and the device operation, counting opening impulses, safe operation of the gate, configuration of output and input signals.

INTERNET

The device driver allows to control and change basic parameters via the Ethernet network*. It is possible to connect the network via Wi-Fi after connecting a Wi-Fi router.

 

 

 

 

 

GRAPHIC TOUCH PANEL

The device is equipped in a colour LCD touch screen with a software using a window-like user interface, enabling easy access to the menu in order to configure and set parameters of the device.

 

 

 

 

 

CONTROLLING

The gate is equipped in a supply and control box, which can power-up, but also control one or two wings of the gate synchronously.

 

 

 

 

 

HIGH-SPEED DRIVE

An engine of the drive with a gear allows fluent and quick movement of a wing or wings of the gate.

 

 

 

 

 

SAFETY SYSTEMS

The gate is equipped in touch strips in a plastic housing as a standard, which switch the drive off is a force is detected.

 

 

 

SPEEDGATE A1 - TWO-WING GATES

(1) – a drive of the gate wing is equipped in an electrical engine with a gear and a grip for its fitting to the gate mast. A two-wing gate includes: two drive mechanisms, one for each wing, (2) – a joint to control folding of a wing of two parts of the gate wings, (3) – a roller positioning the gate wings in a closed position, (4) – touch strips turning the drive mechanism off if a wing comes across a resistance (pressing the touch strip), (5) – masts assembled to a substrate with the use of glued-in anchors, to which the gate wings with the wings drive are then fitted. The mast allows to lead a power wiring system into the substrate. A supply and control box can be fitted to the mast as well, (6) – a grip to assemble the joint to control folding of a wing, equipped in a bolt with a possibility to put on a lock. The lock enables unlocking of the gate in case of a voltage decay, for example. (7) – a supply and control box to control drives of two or one wing, equipped in an inverter or inverters, a residual-current device, a gate control, which allows connecting external devices such as an infrared remote, a card reader, a biometric reader, a control panel and other devices, as well as safety features such as an inductive loop, photoelectric sensors, sound signalling and visual signalling, among others. The control also has inputs (Ethernet, USB) which, if an appropriate software is installed and correct connection established, allow to control or verify the gate status from the level of a computer connected to a computer network, (8) – the gate wing is made of closed profiles as a standard. It is possible to make a filling of the wings individually, according to a Client’s design or concept.

 

SPEEDGATE A1 - ONE-WING GATES

(1) – a drive of the gate wing is equipped in an electrical engine with a gear and a grip for its fitting to the gate mast. A two-wing gate includes: two drive mechanisms, one for each wing, (2) – a joint to control folding of a wing of two parts of the gate wings, (3) – a roller positioning the gate wings in a closed position, (4) – touch strips turning the drive mechanism off if a wing comes across a resistance (pressing the touch strip), (5) – masts assembled to a substrate with the use of glued-in anchors, to which the gate wings with the wings drive are then fitted. The mast allows to lead a power wiring system into the substrate. A supply and control box can be fitted to the mast as well, (6) – a grip to assemble the joint to control folding of a wing, equipped in a bolt with a possibility to put on a lock. The lock enables unlocking of the gate in case of a voltage decay, for example. (7) – a supply and control box to control drives of two or one wing, equipped in an inverter or inverters, a residual-current device, a gate control, which allows connecting external devices such as an infrared remote, a card reader, a biometric reader, a control panel and other devices, as well as safety features such as an inductive loop, photoelectric sensors, sound signalling and visual signalling, among others. The control also has inputs (Ethernet, USB) which, if an appropriate software is installed and correct connection established, allow to control or verify the gate status from the level of a computer connected to a computer network, (8) – the gate wing is made of closed profiles as a standard. It is possible to make a filling of the wings individually, according to a Client’s design or concept.

DOWNLOAD CATALOGUE CARD

Download catalogue card to learn the details of the turnstile's construction.

DIMENSIONS - TWO-WING GATES

Width of a passage: A B C D E F G H
LR (8m) 9098 2251 2020 8490 8890 534 2650 2750
LR (7m) 8098 2251 2020 7490 7890 534 2387 2487
LR (6m) 7098 2251 2020 6490 6890 534 2125 2225
LR (5m) 6098 2251 2020 5490 5890 534 1862 1962
LR (4m) 5098 2251 2020 4490 4890 534 1600 1700

 

DIMENSIONS - ONE-WING GATES

Width of a passage: A B C D E F G H
4m 4768 2251 2020 4364 4764 534 2650 2750
3m 3768 2251 2020 3364 3764 534 2125 2225
2m 2768 2251 2020 2364 2764 534 1600 1714

PARAMETRES

Supply voltage: 230V 50Hz AC
Power: 100 W
Maximum current consumption while not active (for one drive): ~ 0.2 A
Maximum current consumption while active (for one drive): ~ 1.8 A
Miniature circuit breaker: 6 A (B)
Residual-current device: 25 A
Speed of the wings: depending on a version

 

 

TOP