Gates are designed for assisting pedestrian access control at guarded passage ways, inside buildings, without strict control of pedestrian traffic. Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control, as a device supporting turnstiles (e.g. technical gate or gate for disabled person) Controlling devices (i.e. card reader, button, electronic controler, infrared remote controler) can be attached to the gate. Devices are intended for continuous operation and they may be used in a high density of pedestrian traffic zones.
The device’s main application is to support pedestrian traffic control at: airports (e.g. authorised personnel only passage ways, as well as directing
passenger traffic), at railway stations (e.g. points of ticket control/access control and passenger traffic), points of access control in public utility buildings, points of ticket control and fees (e.g. show facilities, exhibitions, theatres, cinemas), access and time attendance control points in working places (e.g. dedicated areas at factories, offices).
"...Swing gates BR1 series are usually used as a addition to the BR2, GA or GT turnstiles. The uncomplicated design and reliability make this series of turnstiles do the job perfectly..."Head of project department
Rosette covering fixing bolts to the foundation.
Leading barrier is used to determine the passage zone. The barrier is made of stainless steel AISI 304 (EN 10088).
Control panel (version depends on the number of controled devices – 8,6,4 control switches), housing made of stainless steel AISI 304 (EN 10088). Control panel is designed for manual unlocking of the arms' movement for both passage directions.
Pictograms information is made of plastic mounted to the arm within aluminium frames. Standard graphic presents: no admittance sign, way of passage sign.
POWER SUPPLY 230/24V
Single-phase safety isolating transformer designed and tested according to EN61558-2-6. The construction is produced with modern technology and satisfies ever-increasing requirements of service life and reliability. Power supply is adapted for DIN-rail mounting system (35mm DIN-rail).
(1) removeable cover made of stainless steel AISI 304 (EN 10088), giving access to electronic connectors, (2) electronic connectors (function of calibration the arms’ „zero” position, fuse), (3) revolving body made of stainless steel AISI 304 (EN 10088), (4) swing arm made of clear tempered glass 8 mm thick (model GR1–W) or cylindric profile with diameter 25 mm, made of stainless steel AISI 304 (EN 10088) (model GR1-A), (5) the mechanism is equipped with an arm brake, motor, clutch, measurement system to verify the position of the arm, electronic unit, sound signaling system, (6) rosette with 4 holes for fixing the gate to the foundation, (7) electric connector for power
supply, steering and return signals.
Download catalogue card to learn the details of the turnstile's construction.
DOWNLOAD USER MANUAL
Download user manual to learn the details of the turnstile's construction.
|Power supply voltage||24VAC|
|Maximum power consumption||
|Minimal power consumption||2.5A|
|Steering signal||(max. 0.5 sec)|
|Operation temperature||- 25o do +50o C|
|Storage temperature||- 30o do +60o C|
|Operation environment||inside buildings|
|IP protection rate||IP 33|
|Net weight||35 kg|