In
In order for the powder-coated finish to retain its aesthetic and quality properties for the expected periods, it must be subjected to systematic maintenance/cleaning. The frequency and type of maintenance depends primarily on the degree of environmental pollution. In non-industrial environments, maintenance is recommended once every 6-12 months or when dirt or deposits appear. In industrial environments or near marine reservoirs or pool basins, construction sites, the surface should be maintained more frequently depending on the deposits and dirt accumulating, e.g., once every three months.

In a “normal” urban environment, we recommend cleaning at intervals of no more than 18 months, unless excessive dirt appears on the coating. In such cases, the coating should be cleaned more frequently. For areas with high environmental pollution, near marine reservoirs or swimming pools, cleaning should be performed every 3 months.

When cleaning powder-coated elements, do not use materials with abrasive properties that may cause permanent damage to the coating.

The coatings of gates and turnstiles should be cleaned using mild, market-tested detergents diluted in lukewarm water with soft, non-abrasive materials (e.g., sponge, brush).

After cleaning, the detergent should be rinsed off the coating.

Before performing cleaning, a test cleaning of a small surface in an inconspicuous area should be carried out each time.